HP Designjet T920 ePrinter series - Manual (Page 67)

● To trim the leading edge of the paper if it is damaged or not straight. The cut strip falls into the basket.
● To feed and cut the paper when the automatic cutter has been disabled.
● To cancel the waiting time and print the available pages immediately, if the printer is waiting to nest
more pages (T1500 series only).
NOTE: The printhead is serviced after each print, and the paper cannot be cut until the process completes,
so you may notice a delay.
NOTE: Photo and coated paper requires careful handling, see The print is scuffed or scratched
on page 166 .
TIP: To move the paper without cutting it, see Move the paper on page 57 .
ENWW Feed and cut the paper 59