Compliance with cdrh regulations, Certification and classification information, Canadien notice (avis canadien) – HP 3000 Enterprise Virtual Array User Manual

Page 117: Class a equipment, Class b equipment, European union notice

Advertising
background image

WARNING!

WARNING: To reduce the risk of exposure to hazardous radiation:
• Do not try to open the laser device enclosure. There are no user-serviceable components inside.
• Do not operate controls, make adjustments, or perform procedures to the laser device other than

those specified herein.
• Allow only HP authorized service technicians to repair the laser device.

Compliance with CDRH regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration

implemented regulations for laser products on August 2, 1976. These regulations apply to laser products

manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.

Certification and classification information

This product contains a laser internal to the Optical Link Module (OLM) for connection to the Fibre

communications port.
In the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in

the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification

is indicated by a label on the plastic OLM housing.
Outside the USA, the OLM is certified as a Class 1 laser product conforming to the requirements

contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment 11:1996.
The OLM includes the following certifications:

UL Recognized Component (USA)

CSA Certified Component (Canada)

TUV Certified Component (European Union)

CB Certificate (Worldwide)

Canadien notice (avis Canadien)

Class A equipment

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

Class B equipment

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

European union notice

Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage

Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms (the equivalent

international standards are in parenthesis):

Enterprise Virtual Array 3000/5000 user guide (VCS 3.110)

117

Advertising