HP 3000 Enterprise Virtual Array User Manual

Page 173

Advertising
background image

I/O module

Input/Output module. The enclosure element that is the Fibre Channel drive

enclosure interface to the host or controller. I/O modules are bus speed specific,

either 1 Gb or 2 Gb.

IDX

A 2-digit decimal number portion of the HSV controller termination code display

that defines one of 32 locations in the Termination Code array that contains

information about a specific event.

See also

param

and TC.

in-band communi-

cation

The method of communication between the EMU and controller that utilizes

the Fibre Channel drive enclosure bus.

INFORMATION

condition

A drive enclosure EMU condition report that may require action. This condition

is for information only and does not indicate the failure of an element. All

condition reports have precedence over an INFORMATION condition.

initialization

A process that prepares a storage system for use. Specifically, the system

binds controllers together as an operational pair and establishes preliminary

data structures on the disk array. Initialization also sets up the first disk group,

called the default disk group.

input/output mod-

ule

See

I/O module

.

intake tempera-

ture

See

ambient temperature

interface

A set of protocols used between components such as cables, connectors, and

signal levels.

JBOD

Just a Bunch of Disks. A number of disks connected to one or more controllers.

K

Kilo. A scientific notation denoting a multiplier of one thousand (1,000).

KB

Kilobyte. A unit of measurement defining either storage or memory capacity.

1.

For storage, a KB is a capacity of 1,000 (10

3

) bytes of data.

2.

For memory, a KB is a capacity of 1,024 (2

10

) bytes of data.

LAN

Local area network. A group of computers and associated devices that share

a common communications line and typically share the resources of a single

processor or server within a small geographic area.

laser

A device that amplifies light waves and concentrates them in a narrow, very

intense beam.

Last Fault View

An HSV Controller display defining the last reported fault condition.

Last Termination

Error Array

See

LTEA

.

LCD

Liquid Crystal Display. The indicator on a panel that is associated with an

element. The LCD is usually located on the front of an element.

indicator

Light Emitting Diode. A semiconductor diode, used in an electronic display, that

emits light when a voltage is applied to it.

License Key

A WWN-encoded sequence that is obtained from the license key fulfillment

website.

light emitting

diode

See

indicator

.

link

A connection between ports on Fibre Channel devices. The link is a full duplex

connection to a fabric or a simplex connection between loop devices.

Enterprise Virtual Array 3000/5000 user guide (VCS 3.110)

173

Advertising