HP 3000 Enterprise Virtual Array - Manual (Page 128)

Table 35 AC input current and wattage
Nominal Maximum
Input Voltage Amps Watts Amps Watts
60–Hz Input
100 VAC–JBOD 4.35 436 6.41 641
208 VAC–North
America
2.03 419 2.94 609
50–Hz Input
120 VAC–JBOD 3.59 419 5.27 633
220 VAC–North
America
1.92 418 2.78 608
230 VAC–North
America
1.92 418 2.78 608
240 VAC–Europe 1.76 416 2.55 607
Table 36 and Table 37 define the output voltage and current specifications of the power supply
Table 36 Output voltage and current specifications
Range
Specification Minimum Nominal Maximum
+5.1 VDC
Initial VoltageSteady
state current
+5.13 VDC1.0 A +5.18 VDCN/A +5.23 VDC26.0 A
+12.2 VDC (Disk Drive Voltage)
Initial VoltageSteady
state current
+12.13 VDC1.0 A +12.25 VDCN/A +12.37 VDC26.0 A
+12.5 VDC (Disk Drive Voltage)
Initial VoltageSteady
state current
+12.25 VDC0.0 0A +12.50 VDCN/A +12.75 VDC2.0 A
Table 37 Dual power supply configuration power specifications
Voltage Current (A) Power (W)
Maximum continuous current
+5.1 VDC (with a minimum +12.2 VDC load of 0A) +12.2
VDC (with a minimum +5 VDC load of 4A) +12.5 VDC
26.0 A 28.0 A 2.0 A 132 W342.0 W25.0
W
Total 499.0 W
Maximum peak current (simultaneous seek activity)
+5.1 VDC +12.2 VDC +12.5 VDC 26.0 A 43.0 A 2.0 A 132.0 W 524.0 W
25.0 W
Total 681.0 W
128 Regulatory notices and specifications