HP Switch SFP Modules - Manual (Page 41)

Managing H3C LSW1FC4P0 Interface Card
Configuring an H3C LSW1FC4P0 Interface Card
59273-00 C 31
 SNMP (Simple Network Management Protocol) — allows management of
the H3C LSW1FC4P0 Interface Card through third-party applications that
use SNMP.
 NTP (Network Time Protocol) — allows the H3C LSW1FC4P0 Interface
Card to obtain its time and date settings from an NTP server. Configuring all
of your H3C LSW1FC4P0 Interface Cards and your workstations to utilize
NTP will keep their date/time settings in sync and will prevent difficulties with
SSL certificates and event logs.
 CIM (Common Information Model) — allows management of the H3C
LSW1FC4P0 Interface Card through third-party applications that use CIM.
 FTP (File Transfer Protocol) — allows file transfers to the H3C LSW1FC4P0
Interface Card using FTP. FTP is required for out-of-band firmware uploads
which will complete faster than in-band Firmware uploads.
 Call Home — allows users to configure their switches to send alerts and
events to pagers and Email. Users can configure the type of events and
where the alerts are sent.