HP Switch SFP Modules User Manual
Page 83
Managing Ports
Port Information Data Window
59273-00 C
73
Operational Port Speed
The speed actually being used by the port.
Port Speed Supported
The TF port speeds supported are:2Gbps,
4Gbps, and 8Gbps. The speed supported
for TH and PT ports is 10Gbps.
Symbolic Name
Port symbolic name
POST Status
Status from the most recent Power On Self
Test
POST Fault Code
Fault code from the most recent Power On
Self Test
Test Status
Status from the most recent port test
Test Fault Code
Fault code from the most recent port test
DCBX Enabled
Data center bridging capability exchange
status (internal ports only)
PFC Priority
Priority-based flow control priority (internal
ports only)
VLAN
Virtual Local Area Network status
Advanced Group
MFS Mode
Multiple Frame Sequence bundling status.
Configured I/O Stream Guard
N/A - does not apply to this switch
Operational I/O Stream Guard
N/A - does not apply to this switch
Device Scan
Device scan status. Enabled means the
H3C LSW1FC4P0 Interface Card queries
the connected device during login for FC-4
descriptor information.
Auto Performance Tuning
N/A - does not apply to this switch
AL Fairness
N/A - does not apply to this switch
Port Binding
N/A - does not apply to this switch
Upstream ISL
The ISL over which the switch sends
requests intended for the principal switch
Downstream ISL
N/A - does not apply to this switch
Remote Switch WWN
The world wide name of the remote switch
Table 3-17. Port Information Data Window Entries (Continued)
Entry
Description