HP Switch SFP Modules - Manual (Page 70)

Managing H3C LSW1FC4P0 Interface Card
Using Call Home
60 59273-00 C
Applying All Profiles on a Switch to Other Switches
You can apply all profiles on a switch to one or more switches in a fabric. The Call
Home Profile Multiple Switch Apply dialog (
Figure 2-33 ) is displayed after
selecting the Apply Changes to Multiple Switches in Fabric option on the Call
Home Profile Manager dialog. The Available Switches list shows all switches in
the fabric. Switch names that are greyed-out do not have current Call Home
firmware, and can not receive any profiles. The Selected Switches list shows the
switch names that you selected to receive all profiles from the switch. In the
Available Switches list, select the switches in the fabric to receive all profiles, and
click the double-arrow button to move them to the Selected Switches list. Click the
OK button to start the process. The Results area indicates success or failure of
applying all the profiles on a switch to the switches you selected.
Figure 2-33. Call Home Profile Multiple Switch Apply Dialog