HP QLogic QMH4062 1GbE iSCSI Adapter for c-Class BladeSystem - Manual (Page 20)

Setup 20
• Loopback Test
• Reinit Adapter
• Select Host Adapter
• Exit Fast!UTIL
Fast!UTIL prompts you to select the adapter you want to configure. After changing the settings, exit and
reboot your system to load the new Fast!UTIL parameters.
Configuring Host Adapter settings
1. Press Ctrl+Q at the second CTRL+Q prompt:
Press <CTRL-Q> or <ALT-Q> for Fast!UTIL
2. Select the port to configure using the arrow keys on the keyboard, and then press the Enter key.
3. Select the adapter, and then press the Enter key.