HP QLogic QMH4062 1GbE iSCSI Adapter for c-Class BladeSystem User Manual
Page 9
Advertising
Setup 9
g.
Press the Enter key to continue.
9.
Select 3: Save changes and reset HBA (if necessary) on the options menu.
10.
Enter Yes at the prompt for both ports. After you have saved the configuration, press the Enter key to
continue.
11.
Type p, and then press the Enter key.
12.
Type p, and then press the Enter key. This returns you to the CNA iSCSI Configuration menu.
13.
Select 4: Target Configuration on the CNA iSCSI Configuration menu.
14.
Select the same converged network port you selected in Step 6.
Advertising