HP QLogic QMH4062 1GbE iSCSI Adapter for c-Class BladeSystem User Manual
Page 24
Advertising
Setup 24
2.
Select the IPv4 Address, and then press the Enter key.
3.
Enter the IPv4 Address in the New field, and then press the Enter key.
4.
Select the Subnet Mask, and then press the Enter key.
5.
Enter the Subnet Mask in the New field, and then press the Enter key.
6.
Select the Gateway IPv4 Address, and the press the Enter key.
7.
Enter the Gateway IPv4 address in the New field, and then press the Enter key.
8.
Press the Escape key to return to the Host Adapter Settings menu.
Changing Luns per Target
Luns per target defaults to 16.
Changing Spinup Delay
Spinup Delay defaults to disabled.
Changing the Initiator iSCSI Name
Advertising