Retaining the recovery key/password – HP ProLiant SL250s Gen8 Server User Manual
Page 72
Advertising
Hardware options installation 72
8.
Install the TPM board. Press down on the connector to seat the board ("
" on
9.
Install the TPM security rivet by pressing the rivet firmly into the system board.
10.
Install the FlexibleLOM riser cage (on page
11.
Install the SFF hot-plug drive cage ("
Installing the SFF hot-plug drive cage
" on page
12.
Install the front GPU bracket (on page
13.
Install the interposer board (on page
14.
Install the front GPU cage (on page
15.
Slide the server into the rack.
16.
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
Advertising