Registering host group user information – HP StorageWorks XP Remote Web Console Software User Manual
Page 52
1.
Make sure that Remote Web Console is in Modify mode.
2.
Start LUN Manager and display the Authentication window (
Selecting Port Icon under Fibre Folder)” (page 26)
).
3.
In the Port tree, expand the Fibre folder and select a port or host group on which the user
information you want to delete is registered.
The user information for hosts currently registered on the selected port or host group appears
in the Authentication Information (Host) list.
4.
In the Authentication Information (Host) list, right-click a user information item that you want
to delete.
5.
Select Delete User Information from the pop-up menu.
Delete Authentication Information dialog box (
“Delete Authentication Information Dialog Box”
) appears and asks if you want to delete the selected user information for the host.
6.
Click the OK button to close the message.
7.
Click the Apply button in the Authentication window.
A message appears and asks if you want to apply the setting to the storage system.
8.
Click the OK button to close the message.
The setting is applied to the storage system.
Figure 33 Delete Authentication Information Dialog Box
Registering Host Group User Information
To perform mutual authentication, you need to specify user information for host groups on the ports
of the storage system. Specify unique user information for each host group. You can change the
specified user information for host groups the same way you specified them initially.
To specify user information for a host group:
1.
Make sure that Remote Web Console is in Modify mode.
2.
Start LUN Manager and display the Authentication window (
Selecting Port Icon under Fibre Folder)” (page 26)
).
3.
In the Port tree, select a port or host group whose user information you want to specify.
The currently registered user information for the selected port or host group appears in the
Authentication Information (Target) list.
52
Performing LUN Manager Operations