HP StorageWorks XP Remote Web Console Software - Manual (Page 53)

4. Right-click any point in the Authentication Information (Target) list and select Specify
Authentication information from the pop-up menu.
The Specify Authentication Information dialog box ( “Specify Authentication Information Dialog
Box” (page 53) ) appears. In this dialog box, specify the following user information for the
port or host group selected in the Port tree.
•
Port Name
The port name of the selected port appears. You cannot change the port name.
•
User Name
Specify the user name of the host group in up to 16 characters. You can use alphanumeric
characters. User names are case-sensitive.
•
Secret
Specify the secret (that is, a password used in CHAP authentication) in 12 to 32 characters.
You can use alphanumeric characters, spaces, and the following symbols in a user name:
. - + @ _ = : / [ ] , ~
•
Re-enter Secret
Specify the secret again for confirmation.
5. Click the OK button to close the Specify Authentication Information dialog box.
The specified user information for the port appears in blue in the Authentication Information
(Target) list of the Authentication window.
6. Click the Apply button in the Authentication window.
A message appears and asks if you want to apply the setting to the storage system.
7. Click the OK button to close the message.
The setting is applied to the storage system.
Figure 34 Specify Authentication Information Dialog Box
Clearing Host Groups User Information
To clear user information for a host group:
1. Make sure that Remote Web Console is in Modify mode.
2. Start LUN Manager and display the Authentication window ( “Authentication Window (When
Selecting Port Icon under Fibre Folder)” (page 26) ).
3. In the Port tree, expand the Fibre folder and select a port or host group whose user information
you want to clear.
The currently registered user information for the port or host group appears in the Authentication
Information (Target) list.
Setting Fibre Channel Authentication 53