Deleting host groups – HP StorageWorks XP Remote Web Console Software User Manual
Page 62
4.
Do either of the following:
•
If you want to change the name of the host group, enter a new name in the Group Name
box.
•
If you want to change the host mode, select the new host mode from the Host Mode list.
When selecting a host mode, you must consider the platform and some other factors (see
“Host Modes for Host Groups” (page 34)
for details).
CAUTION:
•
Do not select Reserve from the list. Reserve indicates that the host mode is not currently
supported.
•
If the microcode version is updated to 60-08-0X-XX/XX or later, Reserve is not displayed
in the drop-down list. If you set the system option mode 847 to ON, Reserve can be
displayed in the drop-down list. For details about changing the system option mode, see
“Calling HP Technical Support” (page 106)
5.
If necessary, click the Option button and then select host mode options (see
). For detailed information about host mode options, see
6.
Click the OK button to close the dialog box.
The changes are indicated in blue in the tree.
7.
Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
8.
Click the OK button to close the message.
The changes to the host group name and the host mode are applied to the storage system.
Figure 41 Change Host Group Dialog Box
NOTE:
After you click the Option button, the dialog box expands to display the list of host mode
options. The No. column indicates option numbers. Select the check box for the option you want
to specify.
Deleting Host Groups
NOTE:
You cannot delete host group 0 (zero). To remove all the WWNs and LU paths from host
group 0, you must initialize host group 0 (for details, see
“Initializing Host Group 0 (Zero)”
).
To delete a host group:
62
Performing LUN Manager Operations