Deleting lu paths – HP StorageWorks XP Remote Web Console Software User Manual
Page 80
To view a list of concatenated parity groups:
1.
Start LUN Manager and display the LUN Manager window (
Selecting Icon under Fibre Folder)” (page 13)
).
2.
In the LDEV list, select a logical volume (that is, an LDEV) and then right-click the selected
volume.
3.
Check to see if the Concatenation List command appears in the pop-up menu.
•
If the Concatenation List command appears, the logical volume is dispersed across parity
groups. Select Concatenation List to view a list of the parity groups (
).
•
If the Concatenation List command does not appear, the logical volume is not dispersed
across parity groups.
Figure 44 Concatenation List Dialog Box
Deleting LU Paths
CAUTION:
Do not remove LU paths when host I/O is in progress.
To delete LU paths:
1.
Start LUN Manager and display the LUN Manager window (
Selecting Icon under Fibre Folder)” (page 13)
).
2.
In the tree, double-click a port. The host groups corresponding to the port are displayed.
3.
In the tree, select a host group. The LU Path list displays information about LU paths associated
with the selected host group.
4.
In the LU Path list, select one or more LUNs to which volumes are assigned (if a volume is
assigned to a LUN, the columns on the right of the LUN column are not empty).
5.
Right-click the selection and then select Release LU Path. A message appears asking whether
to delete the specified LU paths.
6.
Click OK to close the message. The selected LU path is removed from the table.
7.
Click Apply in the LUN Manager window. A message appears asking whether to apply the
setting to the storage system.
8.
Click OK to close the message. The settings are applied to the storage system and the specified
LU paths are deleted.
80
Performing LUN Manager Operations