Bluetooth printing problems – HP Photosmart A320 Compact Photo Printer User Manual
Page 33
Print quality is poor.
Solution:
•
The print cartridge may be running out of ink. Check the Print Cartridge light. If
it is solid red, it means that the print cartridge is low on ink and will need to be
replaced soon. For print cartridge replacement instructions, see
For more information about the indicator lights, see
.
•
You may have selected a low-resolution setting on the digital camera when you
took the picture. For better results in the future, set the digital camera to a higher
resolution.
•
Make sure you are using HP Advanced Photo Paper for best results. For more
information, see
“Choose and load paper” on page 9
•
You may be printing on the wrong side of the paper. Make sure the paper is loaded
with the side to be printed facing toward the front of the printer.
•
Try turning the HP Real Life Technologies feature on or off by pressing the OK
button, to see if the results are better.
•
You may have let photos stack in the output tray or placed them in an album before
the colors fully developed. HP recommends exposing the printed surface to the
air for 3 minutes after printing.
•
The print cartridge may need to be cleaned. For more information, see
“Automatically clean the print cartridge” on page 18
.
•
The print cartridge may need to be aligned.
For more information, see
“Align the print cartridge” on page 21
.
When I print photos I see unexpected results.
Cause: The automatic photo enhancing feature is on and is adjusting for red-eye,
brightening, focus, and contrast.
Solution: Turn off the feature by pressing the OK button. See
.
Bluetooth printing problems
Before contacting HP support, read this section for troubleshooting tips or go to the online
support services at
. Be sure to also read the documentation that
came with your HP Bluetooth wireless printer adapter and your device with Bluetooth
wireless technology.
Bluetooth printing problems
31