HP Photosmart A320 Compact Photo Printer - Manual (Page 45)

A Install the software
The printer comes with optional software you can install on a computer.
After using the setup instructions that came in the box with the printer to set up the printer hardware,
use the instructions in this section to install the software.
The USB cable required for printing from a computer might not be included in the box with the printer,
so you might need to purchase it separately. See
“Print from a computer” on page 13 for more
information about this cable.
Windows users Mac users
Important: Do not connect a USB cable until
you are prompted.
1. Insert the HP Photosmart CD into your
computer CD-ROM drive. If the Install
Wizard does not appear, locate the
setup.exe file on the CD-ROM drive and
double-click it. Wait several minutes while
the files load.
2. Click Next and follow the onscreen
instructions.
3. When prompted, connect one end of the
USB cable to the USB port on the back of
the printer, and connect the other end to the
USB port on your computer.
4. Follow the onscreen instructions until the
installation is finished.
1. Connect one end of the USB cable to the
USB port on the back of the printer, and
connect the other end to the USB port on
your computer.
2. Insert the HP Photosmart CD into your
computer's CD-ROM drive.
3. On your desktop, double-click the
HP Photosmart CD icon.
4. Double-click the HP Installer icon, and
follow the instructions on each installation
screen to install the printer software.
5. When the Congratulations screen appears,
click OK.
Install the software 43