HP Photosmart A320 Compact Photo Printer - Manual (Page 47)

B Indicator lights
The indicator lights on the HP Photosmart A320 series printer tell you about the state of the printer.
The tables in this section explain some of the most common and important patterns, as follows:
•
The On light tells you about the printer's power state.
• The Resume light tells you about the current print job. It indicates that you need to press the
OK button after clearing an error condition.
• The Print Cartridge light tells you about the print cartridge.
• The PictBridge light tells you about the connected PictBridge camera.
• The Attention light usually acts in combination with the other lights. It indicates that you need
to correct a problem before printing can resume.
The Red Eye light is not listed here, because its only function is to tell you whether or not the
automatic photo enhancing feature is turned on.
If the printer is connected to a computer, check the computer screen for information about the error
condition and how to resolve it.
NOTE: If something new occurs, lights that are turned on to indicate one thing may change to
indicate the new event. For example, the On light is normally a solid green whenever the printer
is turned on. However, if you print a photo, the On light flashes until the printer is finished printing.
Table B-1 Indicator lights
Lights Status Meaning
The On light is solid green. The printer is on and ready to print.
The On light is flashing green. The printer is starting up or busy.
The On light and the PictBridge light
are both flashing green. The printer is printing photos from a
connected PictBridge camera.
The Attention light is solid red, and
the Print Cartridge light is flashing
red. The print cartridge door is open, and
printing cannot begin or resume until
this door is closed.
Indicator lights 45