HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 130)

2. Remove the orange protective caps by pulling them down.
3. The printhead is designed to prevent you from accidentally inserting it into the wrong slot. Check
that the colored label on the printhead matches the colored label of the carriage slot into which the
printhead is to be inserted.
4. Insert the new printhead into its correct slot in the carriage.
CAUTION: Insert the printhead slowly and vertically, straight down. It may be damaged if you
insert it too fast, or at an angle, or if you rotate it as you insert it.
120 Chapter 9 Handling ink cartridges and printheads ENWW
Ink
and
p
rin
thea
ds