HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 22)

Printer sharing considerations
● The HP Printer Utility must be installed on a computer before it can be used from that computer.
● Any other people sharing your directly connected printer will be able to send print jobs, but will not
be able to receive information from the printer—which affects printer alerts, printer status reports,
paper management, printer administration and troubleshooting.
● Any other people sharing your directly connected printer will be unable to use the printer's own
print preview facility, although the application's print preview will still be available. See
Preview a
print on page 51 .
TIP: The best way to share the printer over a network is to connect the printer not to any computer,
but to the network. See Connect to a network (Windows) on page 10 .
Uninstall the printer software (Windows)
1. Insert the HP Start-Up Kit CD into your CD drive. If the CD does not start automatically, run the
autorun.exe program in the root folder of the CD.
2. Select Modify Installation, and follow the instructions on your screen to uninstall the printer
software.
Connect to a network (Mac OS)
You can connect your printer to a network under Mac OS by using the following methods:
● Bonjour/Rendezvous
● TCP/IP
NOTE: The printer does not support AppleTalk.
Before you begin, check your equipment:
● The printer should be set up and on.
● The Ethernet hub or router should be on and functioning correctly.
● All computers on the network should be on and connected to the network.
● The printer should be connected to the network.
Now you can proceed to install the printer software and connect your printer.
Bonjour/Rendezvous connection
1.
Go to your printer's front panel and select the Connectivity menu icon , then Gigabit
Ethernet > View configuration. Note the mDNS service name of your printer.
2. Insert the HP Start-Up Kit CD into your CD drive.
12 Chapter 2 Installing the software ENWW
Soft
wa
re inst
al
lat
ion