Tcp/ip connection – HP Designjet Z3200 PostScript Photo Printer series User Manual
Page 24
Click Continue.
9.
Continue following the instructions on the screen. When you reach the Printer Queue Created
screen, click Quit to exit, or Create New Queue if you want to connect another printer to the
network.
10.
When the HP Printer Setup Assistant has finished, you can remove the CD from the CD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
CD.
TCP/IP connection
1.
Go to your printer's front panel and press the
Menu
key until you see the status screen.
Note the URL of your printer (http://XXXX11 in this example).
2.
Insert the HP Start-Up Kit CD into your CD drive.
3.
Open the CD icon on your desktop.
4.
Open the Mac OS X HP Designjet Installer icon.
5.
Follow the instructions on your screen. You are recommended to use the Easy Install option, which
will install the PostScript printer driver. If you would like to install the PCL3 (raster) driver, select
Custom Installation.
6.
The printer software is installed, including the printer driver and the HP Printer Utility.
7.
When the software has been installed, the HP Printer Setup Assistant starts automatically, to set
up a connection to your printer. Follow the instructions on your screen.
14
Chapter 2 Installing the software
ENWW
Soft
wa
re inst
al
lat
ion