HP OpenView Storage Provisioner Software License - Manual (Page 125)

Provisioning Storage
123 OpenView Storage Provisioner User Guide
3. Enter the volume name, a short description, and select the Service Level and
Size.
■ The service level is predefined by the Storage Provider; select from the
pull-down list. The selected service level adjusts the range of sizes
available to select.
■ The size range is determined by the following:
— The remaining quota for the customer in the utility.
— The amount of unused storage on each storage system in the utility.
— The amount of storage being reserved for copy.
— The limits enforced by the storage system on volume size.
■ For the HSG80, select the size from a pull-down list. For the HSV110,
enter the size based upon a 1-GB to 255-GB limit.
■ The Cost is updated when the size or service level changes.
■ Click Next to continue or Cancel to stop the create process.
Figure 75: Create Volume – volume group
4. Select an existing Volume Group from the displayed list.