HP PSC 1510xi All-in-One Printer - Manual (Page 47)

1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape
Hold the print cartridges by their black plastic sides, with the label on top. Do not
touch the copper-colored contacts or the ink nozzles.
Warning Be careful not to drop the print cartridges. This can damage them,
making them unusable.
Replace the print cartridges
When the ink level for the print cartridge is low, replace the print cartridge. Make sure
you have a replacement print cartridge available before removing the empty print
cartridge. You should also replace the print cartridges when you see faded text or if
you experience print quality issues related to the print cartridges.
You can check the estimated amount of ink remaining in your cartridges by using the
HP Image Zone software that came with your HP All-in-One. For information on
checking the ink levels from the HP Director (or HP Solution Center ), see Check the
estimated ink levels .
Tip You can also use these instructions to replace the black print cartridge
with a photo print cartridge for printing high-quality color photos.
To find out the reorder number for all the print cartridges that your HP All-in-One
supports, see
Order print cartridges . To order print cartridges for your HP All-in-One,
go to www.hp.com . If prompted, choose your country/region, follow the prompts to
select your product, and then click one of the shopping links on the page.
Chapter 11
44 HP PSC 1500 All-in-One series
Maintain your HP
All-in-One