HP PSC 1510xi All-in-One Printer User Manual
Page 76
2.
Open the print-carriage access door.
3.
Wait until the print carriage is idle and silent, and then remove the print cartridges from their
slots.
For information on removing the print cartridges, see
4.
Place the print cartridges in print cartridge protectors or an airtight plastic container so they
will not dry out, and put them aside. Do not send them with the HP All-in-One unless the
HP customer support call agent instructs you to.
5.
Close the print-carriage access door and wait a few minutes for the print carriage to move
back to its home position (on the left side).
Note
Make sure the scanner has returned to its parked position before turning off
the HP All-in-One.
6.
Press the
On
button to turn off the HP All-in-One.
7.
Unplug the power cord, and then disconnect it from the HP All-in-One.
Caution
Do not return the power cord and power supply with the HP All-in-One.
The replacement HP All-in-One will not be shipped with these items. Store the
power cord and power supply in a safe place until the replacement HP All-in-One
arrives.
8.
If available, pack the HP All-in-One for shipment by using the original packing materials or
the packaging materials that came with your exchange device.
If you do not have the original packaging materials, please use other adequate packaging
materials. Shipping damage caused by improper packaging and/or improper transportation
is not covered under the warranty.
9.
Place the return shipping label on the outside of the box.
10. Include the following items in the box:
–
A complete description of symptoms for service personnel (samples of print quality
problems are helpful).
–
A copy of the sales slip or other proof of purchase to establish the warranty coverage
period.
–
Your name, address, and a phone number where you can be reached during the day.
User Guide
73
G
et HP
support