HP StorageWorks XP Remote Web Console Software - Manual (Page 121)

Hitachi TrueCopy for z/OS user guide 121
NOTE: TC390 and SI390 can function together in the same XP12000/XP10000 to provide both internal
and remote backup for your data. If you are planning to combine TC390 and SI390, read the important
configuration information in ” Combining TrueCopy with other data management operations ” on page 57.
If you will be using the TC390 software to perform remote copy operations, the management station must
be LAN-attached to the MCU of each TC390 volume pair. You should also install and attach a
management station to the RCUs at your remote site. If you will be using PPRC commands instead of XP
Command View Advanced Edition Software or XP Remote Web Console, contact your HP account support
representative for information on TC390 configuration services. The following TC390 operations cannot be
performed using PPRC commands: asynchronous options, group addition/deletion, and group options. For
more information on using PPRC commands with the XP12000/XP10000, see ” Using PPRC commands for
TrueCopy ” on page 157.
Common procedure for TrueCopy pair operation
From the Pair Operations window (see ” TrueCopy main window (Pair Operations window) ” on page 68),
you can perform the pair setting operations. All the operations that can be performed from the Pair
Operations window have a common procedure.
To perform the pair settings operation:
1. Select a CU number in the CU Number tree.
NOTE: A CU number must be selected in the tree.
2. Select one or more devices or pairs in the Volume list.
3. Right-click to display the pop-up menu (see Figure 66 ). The pop-up menu consists of the following:
• Pair Status: Displays the volume status (see ” Viewing the status of TrueCopy volume pairs (Pair
Status) ” on page 123).
• Add Pair: Creates a volume pair using the following commands: Synchronous and Asynchronous
(see ” Creating TrueCopy volume pairs (Add Pair) ” on page 125).
• Delete Pair: Deletes the pairs (see ” Deleting TrueCopy volume pairs (Delete Pair) ” on page 136).
• Suspend Pair: Splits (Suspends) the pairs (see ” Suspending TrueCopy pairs (Suspend Pair) ” on
page 131).
• Resume Pair: Resumes the pairs (see ” Resuming TrueCopy volume pairs (Resume Pair) ” on
page 134).
• Change Pair Option: Changes the pair option (see ” Changing the pair options (Change Pair
Option) ” on page 139).