Gdps-tc390-hxrc matrix, Table 47 gdps-tc390-hxrc matrix, 47 gdps-tc390-hxrc matrix – HP StorageWorks XP Remote Web Console Software User Manual

Page 184

Advertising
background image

184 Hitachi TrueCopy z/OS for HP XP12000/XP10000 and SVS 200 storage systems

GDPS-TC390-HXRC matrix

The following table compares IBM 3990-6E GDPS support to XP disk array GDPS support, and also

provides a comparison of TC390 and HXRC to PPRC and XRC.

NOTE:

The information shown in the following table was current at the time of publication of this

document but is expected to change over time. Contact your HP account support representative for the

latest GDPS-TC390-HXRC matrix information.

Table 47

GDPS-TC390-HXRC matrix

zSeries and S/390

Feature

IBM 3990-6E

XP12000/XP10000

XP48/XP512

GDPS

Planned outage

Supported

Supported

Supported

Unplanned outage

through IEA494I

Supported

Supported

Supported

IEA494I Long Busy

message

Default time of 120

seconds for FREEZE

after IEA494I message

is issued.

Default time for FREEZE is 120

seconds, optional user-defined

from 0 to 600 seconds after

IEA494I message is issued.

Default time for FREEZE is

120 seconds, optional

user-defined from 0 to 600

seconds after IEA494I

message is issued.

Peer-to-Peer Remote

Copy

PPRC

TC390, TC390A

XP Continuous Access

Hardware based

3990-6 to 3990-6

XP12000/XP10000 to

XP12000/XP10000.
XP1024/XP128 is restricted to

CPU 0-3 when attached to

XP256.

XP12000/XP10000 to

XP12000/XP10000.

XP12000/XP10000 is

restricted to CPU 0-3 when

attached to XP256.

disk array-disk array

interface

ESCON – maximum of

43 km
Communication

through channel

extenders

Communication via switch and

extender using Fibre Channel

and Fibre Channel cable

ESCON – maximum of 43 km
Communication through

channel extenders

CNT - Channelink or

UltraNet
InRange 9800MAX
InRange 9801

Copy modes

supported

Synchronous

Synchronous, asynchronous
The default for IBM software

commands is synchronous.

Synchronous,

semi-synchronous,

asynchronous
Semi-synchronous can be

specified only by Remote

Console PC (or SVP). The

default for IBM software

commands is synchronous.

Dual Copy

combination support

Supported

Not Supported. Dual Copy is

not supported by disk array.

Not Supported. Dual Copy is

not supported by disk array.

Advertising
This manual is related to the following products: