HP StorageWorks XP Remote Web Console Software - Manual (Page 72)

72 Hitachi TrueCopy z/OS for HP XP12000/XP10000 and SVS 200 storage systems
NOTE: If # is added to the end of an LDEV number, such as 3F#, the LDEV is an external volume. For
more information about external volumes, see Hitachi HPAV for z/OS User Guide.
To create a TC390 Snapshot file:
1. Click Display Filter to display the Display Filter window.
2. Select the options you want in the Display Filter window and close the window.
3. From the Pair Operations window, right-click to display the pop-up menu and click Snapshot. A
confirmation dialog box is displayed.
4. Click OK to create the snapshot file.
NOTE: If a snapshot file already exists, the new snapshot file data will overwrite the existing
snapshot file.
An example of snapshot file is shown in the following figure.
Figure 28 Example of snapshot file
RCU Operations window
Clicking the RCU Operations tab displays the RCU Operations window, which shows the RCU information
and provides access to the TC390 RCU setting operations (see ” RCU operations ” on page 82).
The RCU Operations window consists of the Display buttons, the Operation information, the CU
number/Port tree, the MCU/RCU list (see ” CU Number tree and MCU/RCU list ” on page 73), and the
Port list (see ” Port tree and port list ” on page 75). MCU/RCU list is displayed by default.
<Pair status at 05/10/2002 20:22:12>
Vol Status Sub S/N SSID Vol Type Fence Diff CTG EL Prio Sync CLPR
00:00 Simplex : 00:CLPR0
00:01 Duplex 12345 0001 1F:1E Sync(M) Data Cylinder 032 100 01:CLPR1
00:02 Suspend GRP 12345 0001 1F:1D Asyn(R) Never Cylinder 0C GRP 032 050 02:CLPR2
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14)
(1) LDEV number (8) Fence Level
(2) Status of the pair (9) Differential data setting
(3) Suspend sub status (10) Consistency group number
(4) Other CU S/N (11) Error level
(5) Other CU SSID (12) Copy priority
(6) LDEV number of other CU (13) Pairing progress (%)
(7) Pair mode (14) CLPR number and CLPR name