HP Designjet 4000 Printer series - Manual (Page 157)

accept these colors without changing them. Make sure you have selected the right
media profile in “Print Space, Profile” above.
Printer settings
Ensure that the Paper Type setting on the front panel corresponds to the paper you
intend to use.
How do I get accurate colors from QuarkXPress 6?
This topic outlines one way to have good control over the printed colors you will obtain
from your printer; there are many other ways. We describe the hard-proofing
technique that shows you on your printer how your colors will appear when
reproduced in a press. Before starting, ensure that your paper type has already been
calibrated.
Note EPS, PDF, and grayscale images don't allow page-layout applications
to manage their colors. In addition, such images are displayed very poorly on a
monitor.
Application settings
1.
Open QuarkXPress and select Properties from the Edit menu (Windows) or the
QuarkXPress menu (Mac OS). Then select Quark CMS from the Properties
dialog box.
–
Ensure that the Color Management Active box is checked.
– The Destination Profiles area lets you choose profiles that correspond to
your devices: Monitor profile, Composite Output profile, and Separation
Output profile. Select in the Separation Output profile the profile of your
output device (press) which you want to emulate on your printer later. Select
in the Composite Output profile your printer profile; remember that it depends
on the printer model, paper type, and print quality option.
– In the Default Source Profiles you must set the default profiles for solid colors
and images that don't have embedded profiles. The following default profiles
are recommended: RGB: Adobe RGB 1998, CMYK: SWOP for the USA and
Euroscale Coated v2 for the rest of the world. Also select the rendering
intent, which QuarkXpress uses for all conversions; if in doubt, select
Relative Colorimetric. See “How do I set the rendering intent?” on page 140.
– Check the box Color Manage RGB sources to RGB destinations in the
RGB Default Source Profiles and Color Manage CMYK sources to CMYK
destinations in the CMYK Default Source Profiles.
– The Display Simulation tells QuarkXPress how the display simulation should
behave:
•
None means that it doesn't simulate anything on the display.
• Monitor Color Space means that it converts from the source profile to
the display profile for display only.
155
How do
I get
accurate
colors
from
my
printer?