HP Designjet 4000 Printer series User Manual
Page 67
11. Choose your printer model and click Next.
12. Continue following instructions on the screen until the installation is complete.
Manual IP address configuration
In this case, there is no IP address at the moment of starting the installation. The
installation process will consist of detecting the printer, configuring its IP address, and
installing the driver with these settings. Perform the following steps:
1.
Go to the front panel and select the
icon, then I/O setup > Fast Ethernet (or
Gigabit Ethernet) > Show configuration.
2.
The front panel will display some information, including the printer's MAC
address. Make a note of the MAC address.
3.
Insert the Printer Software Setup for Windows CD into your computer.
4.
Choose the language.
5.
Read the information in the Welcome dialog and click Next.
6.
Read and accept the license agreement.
7.
Choose Connected via the network.
8.
Choose Basic network setup for a PC or server.
9.
Wait while the configuration program looks for printers connected to your
network. When the search has finished, a list of printers will be displayed. Identify
your printer by its MAC address, select it from the list, and click Next.
10. Wait while the configuration program analyzes the network and the printer. As
there are no TCP/IP parameters configured, the program will ask you to enter the
IP address, the subnet mask, and the gateway. Enter these values according to
your network configuration and take care, when choosing the IP address and the
subnet mask, that you select values that will not create conflicts with the current
network devices. It is recommended that you get these values from your network
administrator.
11. Choose your printer model and click Next.
12. At the end of the installation, you will have drivers configured to work with your
printer and your printer will have a valid IP address. You can see this IP address
on the front panel when you select the
icon, then I/O setup > Fast Ethernet
(or Gigabit Ethernet) > Show configuration.
65
How
do I set
up
my
printer
software?