HP Designjet 4000 Printer series User Manual
Page 203
2.
Ensure that Color Calibration is turned on. At the front panel of the HP Designjet
4000 Printer series, select the
icon, then Configuration menu > Color
Calibration > On .
3.
Load the printers with similar paper types.
4.
Ensure that the Paper Type setting on the front panel corresponds to the paper
you have loaded.
5.
If you have an HP-GL/2 file produced for an HP Designjet 1000 Printer series and
you want to print it on an HP Designjet 4000 Printer series, proceed as follows
using the Embedded Web Server or the front panel.
–
Using the Embedded Web Server: in the Color Management section of the
Submit Job page, set the Input Profiles: RGB to None (Native).
–
Using the front panel: select the
icon, then Printing defaults menu >
Color Options > RGB Input Profile: None (Native).
For other HP Designjet Printers, set both printers to match the screen colors
(sRGB if selectable), as when printing with separate HP-GL/2 drivers.
201
The
problem
is print
quality