HP LaserJet 1020 Plus Printer User Manual
Page 52
NOTE:
For best results use a sheet of transparency. If you do not have any transparencies, you can
use copier-grade media, 70 to 90 g/m
2
(18 to 24 lb), with a smooth surface.
1.
Make sure that the printer is idle and the Ready light is on.
2.
Load the media in the input tray.
3.
Print a cleaning page. Access the printer properties (or printing preferences in Windows XP,
Windows Vista, and Windows 7). See
Printer properties (driver) on page 8
for instructions.
NOTE:
The cleaning process takes approximately 3 minutes. The cleaning page will stop periodically
during the cleaning process. Do not turn the printer off until the cleaning process has finished. You might
need to repeat the cleaning process several times to thoroughly clean the printer.
42
Chapter 3 Maintenance
ENWW