HP LaserJet 1020 Plus Printer - Manual (Page 53)

Changing the pickup roller
Normal use with good media causes wear. The use of poor media might require more frequent
replacement of the pickup roller.
If the printer regularly mispicks (no media feeds through), you might need to change or clean the pickup
roller. See
Ordering supplies on page 92 to order a new pickup roller.
CAUTION: Failure to complete this procedure might damage the printer.
1. Turn the printer off, and then unplug the power cord from the printer. Wait for the printer to cool.
2. Open the print cartridge door, and remove the print cartridge.
CAUTION: To prevent damage to the print cartridge, minimize its exposure to direct light. Cover
the print cartridge with a sheet of paper.
ENWW Changing the pickup roller 43