HP Jetdirect 70x home Print Server - Manual (Page 14)

Setup 9
Option B: For HP OfficeJet G, HP LaserJet 3150, or HP
LaserJet 1100A All-in-Ones.
• You must use the Setup CD that shipped with your All-in-One.
During the installation, choose the network installation
option. This option will guide you through the setup.
Option C: For printers not listed above that were previously
installed and working on your PC.
• Insert the HP JetDirect 70X Setup CD and run the Setup
Wizard.
Option D: For printers not listed above that have not been
installed on your PC.
• Part 1. Install the printer. Use the printer Setup CD that
came with your printer. During the setup you may be
prompted to choose a port. If this happens, choose LPT1. If
you get a message saying that no printer is attached to LPT1,
simply continue with the printer installation (you may have
to click Skip).
• Part 2. Insert the HP JetDirect 70X Setup CD and run the
Setup Wizard.
Note: For supported All-in-Ones not listed above, in order
to use the HP JetDirect WebScan feature, you must
choose the TCIP/IP printing protocol. (You will be
prompted for this selection during the Setup
Wizard.) See the Network Scanning section in
Chapter 3 for more information.