HP Jetdirect 70x home Print Server - Manual (Page 34)

Specifications and Service 29
Regulatory Statements
FCC PART 68 STATEMENT (USA)
This equipment complies with Part 68 of the FCC Rules. On the bottom of this
equipment is a label that contains, among other information, the FCC registration
Number and Ringer Equivalence (REN) for this equipment. You must, upon request,
provide this information to your telephone company. (NOTE: REN is not required
for some types of analog or digital facilities.)
This equipment uses an RJ 11 jack.
An FCC compliant telephone cord and modular plug are provided with this
equipment This equipment is designed to be connected to the network or premises
wiring using a compatible modular connector which is part 68 compliant. See
installation instructions for details.
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have all of those devices ring when your telephone number
is called. In most, but not all areas, the sum of the REN’s of all devices connected to
one line shall not exceed five (5.0). To be certain of the number of devices you may
connect to your line, as determined by the REN, you should contact your local
telephone company to determine the maximum REN for your calling area. (NOTE:
REN are associated with loop-start and ground-start ports. Do not use for E&M or
digital ports).
If your telephone equipment causes harm to the telephone network, the telephone
Company may discontinue your service temporarily. If possible, they will notify you
in advance. But if advance notice is not practical, you will be notified as soon as
possible.
You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the proper functioning of your equipment. If they do,
you will be notified in advance to give you an opportunity to maintain uninterrupted
telephone service.
If you experience trouble with this telephone equipment, please contact your local
Hewlett-Packard Service Center for information on obtaining service or repairs. The
telephone company may ask that you disconnect this equipment from the network
until the problem has been corrected or until you are sure that the equipment is not
malfunctioning.
FCC PART 15 STATEMENT (USA)
General Information. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this
equipment not expressly approved by the Hewlett-Packard Company may cause
interference and void the FCC authorization to operate this equipment.
The Federal Communications Commission has prepared a booklet titled Interference
Handbook (1986), which may be helpful to you. This booklet (stock number 004-000-
004505-7) may be purchased from the Superintendent of Documents, U.S. Government
Printing Office, Washington, D.C. 20402.