HP XP Continuous Access Software User Manual
Page 137
NOTE:
If an error occurs, the right-most column of the Preset list displays the error code. To
view detailed information about the error, right-click the error code, and select Error Detail.
An error message appears providing detailed information about the error.
15. In the list on the Pair Operations pane, verify that the status of the pair is correct
If you selected Entire or None in step 10, the pair status is COPY. If you selected Delta, the
pair status is HOLD.
16. To monitor the progress of the paircreate operations, click Refresh to update the information
in the list or use the Pairdisplay pane (
) to monitor the detailed status of
each pair.
Figure 60 Paircreate pane
•
P-VOL: Primary data volume. The numbers indicate the primary data volume's port number,
G-ID, and LUN. The numbers in parentheses are the CU and LDEV numbers. The G-ID is a
group number for a host group or iSCSI target.
NOTE:
◦
P-VOL displays only one primary data volume even when two or more primary data
volumes are selected in the Pair Operation pane. P-VOL only displays the primary data
volume that has the smallest LUN (LU number).
◦
If a logical volume is an external LU, # appears after the LDEV number. For more
information about external LUs, see the HP StorageWorks External Storage XP user guide.
•
S-VOL: Select a secondary data volume. When specifying a secondary data volume, use the
lists to select the secondary data volume's port, G-ID, and LUN. The G-ID is the group number
for a host group or iSCSI target.
Creating a pair of data volumes (Paircreate)
137