HP Officejet Pro 8000 - A811 - Manual (Page 28)

Follow the instructions for your operating system.
• Print on special or custom-size paper (Mac OS X)
Print on special or custom-size paper (Mac OS X)
NOTE: Before you can print on custom-size paper, you must set up the custom
size in the HP software provided with the printer. For instructions, see Set up
custom sizes (Mac OS X).
1. Load the appropriate paper in the tray. For more information, see Load media.
2. From the File menu in your software application, click Print.
3. Make sure the printer you want to use is selected.
4. Select the custom size created in the paper size popup..
Select any other print settings that you want, and then click Print to begin printing.
5. Change any other settings, and then click Print to begin printing.
Set up custom sizes (Mac OS X)
1. From the File menu in your software application, click Print.
2. Select the desired printer in the Format for pop-up menu.
3. Select Manage Custom Sizes in the Paper Size pop-up menu.
4. Click the + on the left side of the screen, double-click Untitled, and type a name for
the new, custom size.
5. In the Width and Height boxes, type the dimensions, and then set the margins, if
you want to customize them.
6. Click OK.
Print on both sides (duplexing)
You can print on both sides of a sheet of media automatically by using the duplexer.
NOTE: The printer driver does not support manual duplexing. Two-sided printing
requires an HP Automatic Two-sided Printing Accessory (duplexer) to be installed
on the printer.
TIP: If the top and bottom margins in your document are smaller than 12 mm (0.47
inches), the document might not print out correct. To print the document correctly,
turn on the fit to margin option in the printer's control panel . To do so, press the OK
button, select Paper Handling, select Fit to Margin, and then select On.
Perform two-sided printing (Windows)
1. Load the appropriate media. For more information, see Guidelines for printing on
both sides of a page and Load media.
2. Make sure the duplexer is installed correctly. For more information, see Install the
duplexer.
3. With a document open, click Print on the File menu, and then select Print on Both
Sides on the Finishing tab.
4. Change any other settings, and then click OK.
5. Print your document.
Chapter 2
24 Print