Lockstep memory configuration, General dimm slot population guidelines, Advanced ecc population guidelines – HP ProLiant BL460c Gen8 Server Blade User Manual
Page 32: Online spare population
Hardware options installation 32
memory contents of the degraded rank to the online spare rank. The server blade then deactivates the failing
rank and automatically switches over to the online spare rank.
Lockstep memory configuration
Lockstep mode provides protection against multi-bit memory errors that occur on the same DRAM device.
Lockstep mode can correct any single DRAM device failure on x4 and x8 DIMM types. The DIMMs in each
channel must have identical HP part numbers.
General DIMM slot population guidelines
Observe the following guidelines for all AMP modes:
•
Install DIMMs only if the corresponding processor is installed.
•
When two processors are installed, balance the DIMMs across the two processors.
•
White DIMM slots denote the first slot of a channel (Ch 1-A, Ch 2-B, Ch 3-C, Ch 4-D).
•
Do not mix RDIMMs, UDIMMs, or LRDIMMs.
•
Do not mix 3-rank RDIMMs with UDIMMs, LRDIMMs, or standard RDIMMs.
•
When one processor is installed, install DIMMs in sequential alphabetic order: A, B, C, D, E, F, and so
forth.
•
When two processors are installed, install the DIMMs in sequential alphabetic order balanced between
the two processors: P1-A, P2-A, P1-B, P2-B, P1-C, P2-C, and so forth.
•
For DIMM spare replacement, install the DIMMs per slot number as instructed by the system software.
•
Always install three-rank DIMMs in a complete-configuration of 16 three-rank RDIMMs.
For detailed memory configuration rules and guidelines, use the Online DDR3 Memory Configuration Tool
on the HP website
DIMM speeds are supported as indicated in the following table.
Populated slots
(per channel)
Rank
Speeds supported
(MT/s)
1, 2
Single or dual
1600, 1333
2*
Three-
1333
1, 2
Quad
1333
*Three-rank DIMMs are supported in a full-configuration of 16 three-rank RDIMMs only.
Advanced ECC population guidelines
For Advanced ECC mode configurations, observe the following guidelines:
•
Observe the general DIMM slot population guidelines (on page
•
DIMMs may be installed individually.
Online spare population
For Online Spare memory mode configurations, observe the following guidelines:
•
Observe the general DIMM slot population guidelines (on page