HP ProLiant BL460c Gen8 Server Blade - Manual (Page 7)

Component identification 7
Item Description Status
Off = Normal (System is in standby)
2 Power On/Standby
button and system
power LED
Solid Green = System is powered on.
Flashing Green = System is waiting to power on; Power On/Standby button is
pressed.
Solid Amber = System is in standby; Power On/Standby button service is
initialized.
Off and the Health Status LED bar is off = The system has no power.
Off and the Health Status LED bar is flashing green = The Power On/Standby
button service is being initialized.
3 UID LED Solid Blue = Identified
Flashing Blue = Active remote management
Off = No active remote management
4 FlexibleLOM LED Green = Network linked
Flashing Green = Network activity
Off = No link or activity
Drive LED definitions
Item LED Status Definition
1 Locate Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
2 Activity ring Rotating green Drive activity
Off No drive activity
3
Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
4 Drive status Solid green The drive is a member of one or more logical drives.
Flashing green The drive is rebuilding or performing a RAID migration, stripe size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing
amber/green
The drive is a member of one or more logical drives and predicts
the drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.