HP Scitex FB950 Printer series - Manual (Page 66)

5. Repeat steps 2 through 4 for each head containing bad jets you want to report.
6. When you are finished reporting bad jets, press Cancel.
The control panel displays the previous menu.
Clear Individual Bad Jets
When you select Clear Individual Bad Jets, the control panel displays the following prompt:
Head 1: Press Proceed ( ►) to clear a bad jet.
1. Press ▲ and ▼ to select a head number, then press Proceed (►).
The control panel displays a numeric keyboard that you can use to enter the number of the bad
jet.
2. Enter the jet number, then press the Enter key.
3. When you are finished entering jet numbers, press the Esc key.
The control panel displays the head selection message again.
4. Press ▲ and ▼ to select the next head number, then press Proceed.
5. Repeat steps 2 through 4 for each head containing bad jets you want to clear.
6. When you are finished clearing bad jets, press Cancel.
The control panel displays the previous menu.
View Current Bad Jets
When you select View Current Bad Jets, the control panel displays the following prompt:
Head 1: Press Proceed to view bad jets.
1. Press ▲ and ▼ to select a head number, then press Proceed (►).
The control panel displays a message that lists the bad jets by number.
2. Press Proceed ( ►) to return to the head selection screen.
3. Repeat steps 1 and 2 for each head you want to check for bad jets.
4. When you are finished viewing bad jets, press Cancel.
The control panel displays the previous menu.
Clear All Bad Jets for a Head
When you select Clear All Bad Jets for a Head, the control panel displays the following prompt:
60 Chapter 4 Calibration ENWW