HP Scitex FB950 Printer series - Manual (Page 81)

Clean service station wiper (monthly)
Clumps of ink can accumulate around the wiper blades. If not cleaned off, the wipers can press the
clumps of ink into the printhead orifices, which can clog the printhead jets.
1. Wear cloves, such as latex, to protect your hands from ink.
2. Using a lint-free cloth saturated with head flush (do not use IPA) wipe both sides of the rubber
wiper.
NOTE: For clarity, this procedure is shown with the end enclosure removed. However, it is not
necessary to remove the enclosure for this cleaning.
ENWW Clean service station wiper (monthly) 75