HP Officejet 150 Mobile All-in-One Printer - L511a - Manual (Page 124)

Set Bluetooth security for the printer
You can enable the following printer security settings from the printer’s control panel
•
Require passkey authentication prior to someone printing to the printer from a Bluetooth
device.
• Make the printer visible or invisible to Bluetooth printers that are within range.
TIP: You can also use Toolbox (Windows), HP Utility (Mac OS X), or the Toolbox software
for PDAs (Windows Mobile) to configure these settings. For more information, see Printer
management tools.
This section contains the following topics:
•
Set the Bluetooth Security Level
• Set the printer to be visible or not visible to Bluetooth devices
• Reset Bluetooth settings
Set the Bluetooth Security Level
You can set the security level of the printer to either High or Low.
NOTE: You can also change the Bluetooth settings using Toolbox (Windows). For more
information, see Toolbox (Windows).
• Low: The printer does not require a passkey. Any Bluetooth device within range can print to
it.
NOTE: The default security setting is Low. Low level security does not require
authentication.
• High: The printer requires a passkey from the Bluetooth device before allowing the printer
to send a print job to it.
NOTE: The printer ships with a predefined passkey that is set to six zeroes "000000".
To set the printer to require passkey authentication
1.
Touch right arrow , and then select Bluetooth.
2. Select Settings, and then select Passkey.
3. Select Change, and then use the keypad to enter a new passkey.
4. When you have finished entering your passkey, touch Done.
5. Select Security Level, and then select High.
6. High level security requires authentication.
Passkey authentication is now set for the printer.
Set the printer to be visible or not visible to Bluetooth devices
You can set the printer to be either visible to Bluetooth devices (public) or not visible to any
(private).
•
Visible: Any Bluetooth device within range can print to the printer.
• Not visible: Only Bluetooth devices that have stored the device address of the printer can
print to it.
NOTE: The printer ships with a default accessibility level of Visible.
Appendix C
120 Set up the printer for Bluetooth communication