HP Officejet 150 Mobile All-in-One Printer - L511a - Manual (Page 28)

4. Insert the media print-side up and align it squarely against the paper guide.
NOTE: Do not load paper while the printer is printing.
5. Adjust the paper width guide so it fits snugly against the sides of the paper.
Install and use the battery
The printer comes with a lithium-ion rechargeable battery. It is also available for
purchase as an optional accessory. For more information, see HP supplies and
accessories.
This section contains the following topics:
•
Battery safety
• Understand the battery
• Charge and use the battery
Battery safety
• Use only the battery designed specifically for the printer. For more information,
see HP supplies and accessories and Printer specifications.
• When discarding a battery, contact your local waste disposal provider regarding
local restrictions on the disposal or recycling of batteries. Though the lithium-ion
rechargeable battery is mercury-free, it might require recycling or proper disposal
at end-of-life. For more information, see Recycling program.
• The battery might explode if incorrectly replaced or disposed of in fire. Do not
short-circuit the battery.
• To purchase a replacement battery, contact your local dealer or HP sales office.
For more information, see HP supplies and accessories.
• To avoid risk of fire, burns, or damage to the battery, do not allow a metal object
to touch the battery contacts.
• Do not disassemble the battery. The battery has no serviceable parts inside.
• Handle a damaged or leaking battery with extreme care. If you come in contact
with the electrolyte, wash the exposed area with soap and water. If it contacts the
eye, flush the eye with water for 15 minutes and seek medical attention.
• Do not charge, store, or use the battery in places where the temperature exceeds
the limits specified in Operating environment.
Important notes
Take note of the following when charging or using the battery:
•
Charge the battery for 4 hours before using the battery for the first time. For
subsequent charges, it takes approximately 3 hours to fully charge the battery.
• The battery charge light is amber when the battery is charging. If it is red, the
battery might be faulty and need to be replaced.
• To see battery status, touch Power Meter on the control-panel display. The
battery status is also displayed in Toolbox (Windows) and HP Utility (Mac OS X).
If you are using a Microsoft Windows Mobile® device, you can use the Toolbox
software for PDAs. For more information, see Printer management tools.
Chapter 1
24 Get started