HP Officejet 150 Mobile All-in-One Printer - L511a - Manual (Page 32)

NOTE: If you are connecting a digital camera, change the USB mode of the
camera to storage mode, and then connect one end of the USB cable to the
camera. Different cameras use different terms to describe the storage mode. For
instance, some cameras have a digital camera setting and a disk drive setting. In
this instance, the disk drive setting is the storage mode setting. If storage mode
does not work on your camera, you might need to upgrade the camera firmware.
For more information, see the documentation that came with the camera.
NOTE: If your USB device does not fit into this port due to size limitations, or if the
connector on the device is shorter than 11 mm (0.43 in), you will need to purchase
a USB extension cable in order to use your device with this port. For more
information on supported USB devices, see Memory device specifications.
Print from mobile phones
If you have a mobile phone that supports Bluetooth, you can purchase software that
allows you to print documents and photos from your phone.
NOTE: If you are using a mobile phone running Windows Mobile, you can use the
HP software CD to install the printing software.
For a list of mobile phones and printing software, as well as information about obtaining
the software, see Mobile phone printing information.
Maintain the printer
The printer does not require scheduled maintenance, except for replacing the ink
service module. For more information, see Replace the ink service module. You should
attempt, however, to keep the printer free of dust and debris. This cleaning keeps the
printer in peak condition and might also make the diagnosis of problems easier.
WARNING! Turn off the printer and unplug the power cord before cleaning the
printer. If using the optional battery, turn off the printer and remove the battery
before cleaning.
This section covers the following topics:
•
Clean the printer
Chapter 1
28 Get started