HP Virtual Connect Enterprise Manager Software - Manual (Page 22)

1. Select the VC Domains that are targeted for firmware updates.
NOTE: Using the firmware update workflow requires VCSU 1.7.0 and the VC Domains
being updated must be running VC 3.50 or later. Otherwise, enable maintenance mode on
the VC Domain in preparation for updating the VC firmware with VCSU.
Figure 7 VC Domain tab page
2. Select VC Domain Firmware Update... and all the VC Domains selected are displayed.
3. Select Enable Firmware Update... ( Figure 8 ).
NOTE: VC Domain Firmware update will stay enabled until all VC Domains selected display
the Firmware update status.
Figure 8 Enabling firmware updates
A message similar to the following is displayed:
22 Installing and configuring VCEM