HP Virtual Connect Enterprise Manager Software - Manual (Page 81)

For VC Domains, you can provide the target boot LUN in either of the following possible formats:
•
When using LUN values from 0–255, you can specify the LUN and either decimal or in 16-digit
hexadecimal number format.
•
When using LUN values greater than 255, you must specify the LUN in 16-digit hexadecimal
number format.
To specify the LUN and a 16-digit hexadecimal number format, place the desired hexadecimal
number preceded by leading zeros as shown in the following examples:
•
1023 can be represented in 16-digit hexadecimal format as 00000000000003ff or
00000000000003FF (not case-sensitive).
•
18446744073709551615 is represented in 16-digit hexadecimal format as ffffffffffffffff or
FFFFFFFFFFFFFFFF.
Configuring multiple networks
To configure multiple networks
1.
In the Ethernet connections table expand the network name menu and select Multiple Networks.
The Server VLAN tag to vNet Mappings window appears.
Figure 31 displays multiple networks.
Figure 31 Server VLAN tag to vNet Mappings window
2. You can filter also networks by the following attributes:
•
Name
•
Shared Uplink Set
•
VLAN Id
•
Color
•
Label
The second drop-down box defaults to Contains and you can enter part of a filter such as
Name or Shared Uplink Set. If you choose Color, the drop-down box defaults to Is.
3. Click the Force same VLAN mappings as Shared Uplink Set check box to enable or disable it
depending on your base configuration.
Figure 32 displays the options.
Configuring multiple networks 81