HP XP Racks - Manual (Page 89)

Description Error code
(SSB2)
The volume is a THP V-VOL; the pair using the volume is a BC, Fast Snap, or Snapshot pair, or a Auto LUN
reserve volume.
The volume is a THP V-VOL and an addition to volume capacity is in progress, or pages are being released.
The capacity of the volume is different from the capacity of the P-VOL
The volume is initialized by BC
The pair cannot be created because the volume specified for the P-VOL is a system volume. C3DA
S-VOL pair status is not PSUS or PSUE. C3DB
The pair cannot be created because the remote path is not valid. C4DE
The required amount of shared memory for the operation is not installed in the secondary system. C4FC
Cnt Ac-S, Cnt Ac-S Z, Cnt Ac-J, and Cnt Ac-J Z cannot be mixed in the consistency group. CB12
The secondary system consistency group cannot be deleted because the horctakeover command reversing
operations between the P-VOL and S-VOL failed. CB19
The secondary system consistency group was abnormally terminated because the horctakeover command
reversing operations between the P-VOL and S-VOL failed. CB1A
No dummy volume can be created in the S-VOL. CB1D
The secondary system does not support Cnt Ac-S. CB1F
In referring to the function bit, the system information reference was abnormally terminated. CB20
In a Pairresync operation, all difference setting was abnormally terminated. CB21
An internal error occurred. CB23
Cnt Ac-S is not installed in the secondary system. CB60
One DKC cannot include a pair using Escon and a pair using Fibre. CB62
The required differential area is not available in the secondary system. CB66
An additional shared memory is not installed in the secondary system. CB67
The required differential area is not available in the primary system. CB68
The number of pairs exceeds the maximum number that can be created in a single consistency group. CB69
The Paircreate operation cannot run because the P-VOL is an external storage system volume. CB6E
The Paircreate operation cannot run because the S-VOL is an external storage system volume. CB6F
The Paircreate operation cannot run because the P-VOL is an external storage system migration volume. CB71
The Paircreate operation cannot run because the S-VOL is an external storage system migration volume. CB73
The device is not recognized correctly. CB75
The Paircreate operation cannot run because the paths are specified per storage system. CB76
The used capacity of the Data Retention software product on the secondary system exceeds the license
capacity. CB77
The Paircreate operation cannot run because the specified S-VOL is defined as the command device. CB78
A request for a Paircreate operation was rejected because the specified S-VOL belongs to a different CLPR
than the registered consistency group's CLPR. CB7E
A request for a Paircreate operation was rejected in the RCU because the configuring function for one or
more of the specified OPEN or mainframe consistency groups on the MCU and/or RCU is unsupported. CB9E
The storage system is in internal processing. Try the operation again. CBD7
Troubleshooting using RAID Manager 89