Mounting the stand, Screw mount, Mounting the stand –3 – HP Point of Sale rp5000 User Manual
Page 13: Screw mount –3
Advertising
Setting Up the Scanner
User Guide
www.hp.com
3–3
4. Bend the neck to the desired position for scanning.
Mounting the Stand
You can attach the base of the scanner’s stand to a flat surface
using two screws or double-side tape (not provided).
Screw Mount
1. Position the assembled base on a flat surface.
2. Screw one #10 wood screw (not provided) into each
screw-mount hole 1 until the base of the stand is secure.
Advertising