Operating the scanner, Defining beeper sequences, 4 operating the scanner – HP Point of Sale rp5000 User Manual
Page 39: Defining beeper sequences –1
User Guide
www.hp.com
4–1
4
Operating the Scanner
This chapter covers techniques, tips and instructions involved in
scanning bar codes and defining beeper and LED indicators.
Before using the scanner, you will need to install and program
your scanner.
■
For instructions on installing the scanner, refer to Chapter 3,
“Setting Up the Scanner.”
■
To configure or program your scanner, refer to Chapter 5,
“Programming User Preferences.”
■
To program different or additional bar code features, refer to
the Programming Reference Guide, included on the Point of
Sale System Software and Documentation CD. This guide
provides the programming bar codes necessary for selecting
non-default features, customizing data, and other
programming selections for your scanner.
Defining Beeper Sequences
The scanner communicates with the user by emitting different
beeper sequences and patterns. Refer to the “Standard Beeper
Definitions” table in the chapter to define beep sequences that
occur during both normal scanning and while programming the
scanner.