ABL electronic Scamax 5000 - Manual (Page 14)

DpuScan
Scamax 2600 / 5000 Scanner Options
If the counters are correspondingly set and enabled in the module Patchcode-Controlled Index, they
will be set and incremented as per the defined rules. So, for example, a document with the Patchcode
”Patch I” can indicate a new chapter. The chapter counter value increases incrementally by one and
the sheet counter is reset to zero.
The Index Flags
There are two flags that can be set for a sheet:
The latched flag remains set until it is reset, manually or via a defined Rule.
It can, for example, indicate that certain sheets are addenda to a certain form.
The momentary flag is valid only for the next sheet; it is then automatically reset.
You can use it, for example, to mark only the first document ("main document") of a new batch.
Document Level
The module uses the document level for Patchcode-Controlled Index, for example, to control
document separation.
Sequential ID
The scanner assigns a sequential number to the scanned sheets. This number usually cannot be
modified by a rule from the Patchcode-Controlled Index.
Exception: The sheet is "voided” or "not counted”.
Page 14 of 42