ABL electronic Scamax 5000 - Manual (Page 37)

Scanner Options Scamax 2600 / 5000
DpuScan
Step 7
Hardware Control
After performing the counter and flag handling, the summary of the hardware
actions take effect.
Unless Drop Page is enabled, the page and the last header will be sent to the
host.
If necessary, the scanner stops now.
Otherwise, the endorser will be turned on or off for the following sheet.
Now the counters, flags, and other parts of the header will be updated.
The newly calculated counters are set for the next image, and not for the
current image.
Then, the next scan command including the print command for the endorser is
sent to the machine.
When the machine returns an image, the driver searches for Patchcodes and
merges the result and the further image-dependent values into the header.
Then the procedure restarts at Step 1.
The dialog on the next page is intended to define the rules.
Page 37 of 42